New Products View catalogue
LumiPix XB100
ORDER CODE: LUMIPIXXB100
Share me

IP65

Immagine Principale
  • LUMIPIXXB100
  • LUMIPIXXB100
  • LUMIPIXXB100
  • LUMIPIXXB100
  • LUMIPIXXB100
  • LUMIPIXXB100
  • LUMIPIXXB100

    • The LumiPix XB is a family of IP65 high power and high quality linear luminaire, designed to meet advanced requirements from Film, Tv and Staging professionals.

    The units are available in 100 cm (18 pixels) and 50 cm (9 pixels) and designed around a 20W RGB + Warm White LED source, delivering a bright 10° narrow beam angle beam angle, but still keeping smooth colour mixing, high CRI and TM30, and calibration down to pixel.

    LumiPix XB can be completed by a wide range of optical modifiers such as optional lenses, holographic filters, eggcrates and barndoors, performing with extreme precision for the desired application. The design of the housing has been conceived to allow fast mounting and deploying of optical accessory through a quick-lock system.

    These units has been designed to offer multiple choice of control like DMX/RDM, Ethernet and Wireless DMX (CRMX and W-DMX), sharing the same user settings and advanced software features of all Spektra calibrated fixtures.

     

    Features:
    IP65, pixel-controlled LED linear fixture, available in 18 pixels and 9 pixels
    20W RGB+WW led source, delivering high CRI (>90), advanced colour control and effects generator
    DMX/RDM control, Ethernet, and Wireless DMX (CRMX + W-DMX)

    LIGHT SOURCE
    • Source:
      18x20
      W
      RGB + Warm White LED
    • Luminous flux:
      7'996
      @full
    • Lux:
      16'724
      lx
      @3 m
    • Lux:
      6'021
      lx
      @5 m
    • CRI:
      >94 @3'200 K : >96 @5'600 K
    • R9:
      >91 @3'200 K ; > 90 @5'600 K
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      10
      °
    • Field angle:
      20
      °
    • Lens type:
      different optics available
    • Additional optics:
      several filters available
    COLOUR SYSTEM
    • Colour mixing:
      RGB + Warm White
    • CCT:
      CCT control, + / - green correction, tungsten emulation
    • White presets:
      2.800 K - 10.000
      K
      with 28 K resolution
    • Colour wheel:
      virtual colour wheel with macros
    DYNAMIC EFFECTS
    • Control Resolution:
      16-bit dimmer, colours
    • Pixel patterns:
      pre-programmed pixel macros and cinema lighting effects patterns
    • Special features:
      linear crossfade channel from any white to any colour; virtual CTO on colours
    BODY
    • Body:
      aluminium body
    • Body colour:
      black
    CONTROL
    • Protocols:
      DMX512, RDM, ArtNet, sACN, CRMX
    • Pixel control:
      18
      pixel2pixel control
    • Wireless Control:
      included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
    • RDM:
      RDM for remote monitoring and settings
    • Display:
      Graphic User Interface
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    • Master/Slave:
      for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      selectable dimming modes available
    • Strobe / shutter:
      1 - 30
      Hz, electronic
    • Display battery:
      self-charging battery backup
    • Operating temperature:
      -20° ~ +45°
    • LED Control:
      flicker free frequency with adjustable PWM
    • Selectable PWM:
      600 ~ 40.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      260
      W
    • Output (at 230V):
      8
    • Power factor:
      >0,99
    PHYSICAL
    • IP rating:
      65
      for temporary outdoor use (*)
    • Cooling:
      active, silent operation
    • Suspension and fixing:
      hanging bracket for floor stand. Also can fit the fast quick lock OMEGA bracket
    • Signal connection:
      Seetronic XLR 5p IN/OUT connectors
    • Data connection:
      Seetronic Ethernet IP in/out connectors
    • Power connection:
      Seetronic powerCON TRUE IP65 IN/OUT
    • Dimensions (WxHxD):
      1006x185x150
      mm
    • Weight:
      7,5
      kg
    (*)
    • NOTE:
      Suitable for permanent outdoor use, provided installation and maintenance cycles by qualified technicians are carried.
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM, cTUVus, FCC
    BOX CONTENT
    • 1 x LUMIPIXXB100
    • 1 x OS27
    • 2 x side floor brackets
    • 1 x 1,5 meters 3G1,5mmq power cable (BARE END - SEETRONIC POWERCON TRUE1 IP65 power connector)
    • User Manual
    Accessory Code
    Description
    FCLLUMIPIXXBFCLLUMIPIXXB
    optional
    Flight case for 4 pcs LUMIPIXXB100 or 8 pcs LUMIPIXXB050
    LPXB100BDLPXB100BD
    optional
    Barndoor to adjust the light beam for LUMIPIXXB100
    LPXB100EC60LPXB100EC60
    optional
    60° egg crate for LUMIPIXXB100
    LPXB100FILT20LPXB100FILT20
    optional
    Light diffusion filter for LUMIPIXXB100, 20°
    LPXB100FILT40LPXB100FILT40
    optional
    Light diffusion filter for LUMIPIXXB100, 40°
    LPXB100FILT60LPXB100FILT60
    optional
    Light diffusion filter for LUMIPIXXB100, 60°
    OS27OS27
    include
    Quick-Lock omega bracket, M10 hole
    C6002BC6002B
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black&White& White
    LRLUNALRLUNA
    optional
    Single Universe DMX transceiver with Bluetooth
    TOUR53415L03TOUR53415L03
    optional
    958225L03958225L03
    optional
    3x2.5mm TH07 Cable, 16A 3p PwCon MXW, 16A 3p PwCon FXW, L. 3m
    9513FXWL039513FXWL03
    optional
    Ass. 3x2.5mm TH07 cable, 16A 3p 230V CEE plug, MENAC3FXW socket, L.3 m
    9533FXWL039533FXWL03
    optional
    Ass. 3x2.5mm TH07 cable, SCHUKO plug, MENAC3FXW socket, L.3m
    RSR0630BRSR0630B
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    UPBOX1UP5UPBOX1UP5
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    UPBOXPROUPBOXPRO
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    File name File size Download
    Letter datasheetLumipixxb100_A4_DATASHEET_(EN).pdf549KB
    Letter datasheetLumipixxb100_LETTER_DATASHEET_(EN).pdf548KB
    Tender SpecificationLumipixxb100_TENDER_SPECIFICATION.pdf4MB

    User manual

    DMX chart & personalities

    File name File size Download
    DMX chartLumipixxb100_DMX_CHARTS.pdf634KB
    LUMIPIXXB100 Firmware rev. 1.1.00.0
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    lumipix xb100.dfixDownload
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link

    Photometrics

    CAD symbols & drawings

    File name File size Download
    3D sketchupLUMIPIXXB100_3D_SKETCHUP.zip5MB
    2DLumipixxb100_CAD_2D.dwg6MB
    2D cad symbolsLumipixxb100_CAD_2DSYMBOLS.dwg53KB
    3DLUMIPIXXB100_3D.zip4MB
    Technical drawingLumipixxb100_TECHNICAL_DRAWING.pdf444KB
    VectorWorksVECTORWORKS_SYMBOLS.vwx991KB
    VectorWorksPROLIGHTS_VECTORWORKS_v24_LIBRARY.vwx317MB
    VectorWorksPROLIGHTS_VECTORWORKS_v19_LIBRARY.vwx488MB

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware


    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.1.00.0 STABLE 23/05/2023 First stable release.

    New functions:
    • Spektra Calibration: new modes available
      • ON: CCT and colors are fully calibrated, working in the common color space definition set by Spektra. This means that output of multiple fixtures will match with no visible differences. Color Saturation is slightly reduced.
      • PURE COLORS: CCT is calibrated, giving perfect white matching across multiple fixtures, but primary and secondary colors are calibrated to their native color space which allows maximum color saturation. The closer you move towards white, the more closely multiple fixtures will match each other's output. The further you move away from white and the closer you move towards saturated color, the less closely multiple fixtures will match each other's output.
      • OFF: CCT doesn't guarantee High CRI Values and color output of one fixture may or may not closely match that of other fixtures.

    • Added Dimmer Speed Off
    Improvements:
    • Improved Tungsten Emulation.
    • Improved accuracy of CCT parameters.
    • Added High Res@low Dimmer Curve in RDM
    • Adjusted RDM parameters to fit new functions and new naming.
    • Adjusted Control Channel to fit new functions as follows.
      • Dimmer Speed Off (Control channel values 176 - 177 )
      • Spektra Calibration On (Control channel values 26 - 27 )
      • Spektra Calibration Pure Colors  (Control channel values 28 - 29)
      • Spektra Calibration Off (Control channel values 174 - 175)
    Fixed bugs:
    • Interruption of the light while entering in Emergency mode.
    • Jump prediction does not work when Tungsten Emulation is active.
    • The fixture does not keep the last Gel of the category in the output on Reserved Range.
    • Random flash when changing Spektra Calibration mode.
    • If DMX-WDMX is switched without the fixture being connected to the wireless station, device does not enter DMX Fault mode but always switches off the light source.
    • The Stand Alone-Data Signal transition is not instantaneous.
    • If the fixture is connected via DMX and the menu/Connect/address 'WDMX' is set, the display does not blink, alerting the user to the loss of the data signal.
    • Update screen not shown when performing a firmware update.
    • Presence of flickering when changing CCT via Control Mode Selector.
    • Presence of flickering when changing HSI via Control Mode Selector.
    • In Extended RGB, there are not jump prediction on Red/Green/Blue Channels.
    • In Tour FX Effect 17 one pixel does not work correctly.
    • Process effect in Cine FX is slower than expected.
    • In Extended HSI, when you switch Saturation from 0 to 255 dmx value, the fixture sometimes fades and sometimes jumps.
    • If you set HSI in Control Mode Selector, when you switch Saturation from 0 to 255 dmx value, the fixture sometimes fades and sometimes jumps.
    • Whichever effect is set to Tour FX Sel, if the dimmer encoder (master) is moved, Tour Fade will engage itself.
    • Whichever effect is set to Cine FX, if you move the Dimmer encoder to increase/decrease the dmx values, the effect doesn't work properly.
    • Sometimes when switching from Extended RGBW to EXT RGB or EXT CMY or EXT HSI via Control Channel, the fixture produces long fades from one mode to another.
    • If the fixture is in Extended HSI and Dmx Fault Emergency and Dimmer@0 dmx value is set, when the data signal is removed it will produce a red flash during the Data Signal-DMX Fault Emergency transition.
    • Crossfade from Color to Pixel Engine not working correctly while using ArtNet in Unicast mode.
    		 Rev. 1.0

    Info Request