EclPanel TWCXLPack
ORDER CODE: ECLPANELTWCXLPACK
Share me

Immagine Principale
  • ECLPANELTWCXLPACK
  • ECLPANELTWCXLPACK
  • ECLPANELTWCXLPACK
  • ECLPANELTWCXLPACK
  • ECLPANELTWCXLPACK
  • ECLPANELTWCXLPACK
  • ECLPANELTWCXLPACK
  • EclPanel TWCXL, is an ultra-bright LED soft light, engineered for large scale Film & TV production, that provides a beautiful, wide source of soft and precise colours. In addition to this, the PROLIGHTS EclPanel TWCXL comes with a full range of white colours, from daylight to tungsten tones, reaching a superior light quality with high CRI, TLCI and TM-30. The EclPanel TWCXL allows for quick and accurate local adjustment of light through 4 rotatory knobs with three fully featured modes: CCT with +/- green shift, HSI for total control of hue, saturation and intensity, FX mode to access the on-board pixel cinema effects. The unit can also be controlled on a per-section basis, allowing to play on-board customisable effects or to record them through a lighting desk. Both methods provide eye-candy effects and cinematic special effects. The unit is designed with an on-board driver, a built-in power supply, a Wireless transceiver for remote DMX and RDM control, network connectivity (Art-Net, sACN). Thanks to its lightweight, the EclPanel TWCXL is easy to rig and to connect, making it the perfect lighting fixture for any location.

     

     

    The pack contains:
    1 x flight case (FCLPANELXL1U)
    1 x ECLPANELTWCXL (includes: MD filter EPTWCXLFILTERMD and spigot on-board)
    1 x HD filter (EPTWCXLFILTERHD)
    1 x LD filter (EPTWCXLFILTERLD)
    1 x INT filter (EPTWCXLFILTERINT)
    1 x 30° egg crate (EPTWCXLEC30)
    1 x 60° egg crate (EPTWCXLEC60)
    1 x 48 chambers egg crate (EPTWCXLEC48C)
    1 x short bracket with spigot (EPTWCXLSB)
    1 x 1,5 meters power cable (BARE END - 32A NEUTRIK POWERCON TRUE1 IP65)
    1 x User Manual

     

    Features:
    1.500W RGB + Warm White LED source
    CRI >93; R9 >95; TLCI >93
    48 section pixel control and built-in lighting effects for cinema applications, color gels matching
    Silent operation with multiple fan modes
    Wireless DMX and RDM for wireless control and communication, Ethernet connectivity

    LIGHT SOURCE
    • Source:
      1.500
      W
      RGB + Warm White LED
    • Luminous flux:
      130'725
      @3.200 K with LD filter
    • Lux:
      2'442
      lx
      @5 m full
    • CRI:
      93,4 @3.200 K; 95.4 @5.600 K
    • R9:
      95.6 @3.200 K; 95,9 @5.600 K
    • TLCI:
      93 @5.600 K
    • TM30 Rf:
      91,9 @3.200 K; 90,3 @5.600 K
    • TM30 Rg:
      103,5 @3.200 K; 102,5 @5.600 K
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      109
      °
    • Field angle:
      158
      °
    • Lens type:
      medium density
      diffusion panel (interchangeable)
    • Additional optics:
      see available accessories
    COLOUR SYSTEM
    • Colour control:
      XY, CCT, RGBW, Gel, HSI, Source Emulation, Colour Macros, CTO on colours
    • Colour mixing:
      RGB + Warm White
    • CCT:
      CCT control range from 1.800K to 20.000K, + / - green correction, tungsten emulation
    • White presets:
      1.800 K - 20.000
      K
    • Colour wheel:
      virtual colour wheel with macros
    • Macros:
      Gels library on-board
    DYNAMIC EFFECTS
    • Control Resolution:
      16-bit dimmer, colours
    • Pixel patterns:
      pre-programmed pixel macros and cinema lighting effects patterns
    • Special features:
      linear crossfade channel from any white to any colour; virtual CTO on colours
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black
    CONTROL
    • Protocols:
      DMX512, RDM, ArtNet, sACN, CRMX
    • Stand Alone:
      selectable mode through 4
      RGB backlight push-encoders
    • Pixel control:
      48
      section control
    • Wireless Control:
      included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
    • RDM:
      RDM for remote monitoring and settings
    • Display:
      3.5" with new UI
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      1 - 30
      Hz, electronic
    • Display battery:
      self-charging battery backup
    • Operating temperature:
      -10° ~ +45°
    • LED Control:
      flicker free frequency with adjustable PWM
    • Selectable PWM:
      600 ~ 40.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      1.600
      W
    • Output (at 230V):
      1
      units on a single power line
    • Power factor:
      >0,98
    PHYSICAL
    • IP rating:
      20
    • Cooling:
      active, silent operation
    • Suspension and fixing:
      bracket for hanging and positioning
    • Signal connection:
      Amphenol XLR 5p IN/OUT connectors
    • Power connection:
      32A
      Neutrik powerCON TRUE1 IN/OUT connectors
    • Dimensions (WxHxD):
      1638x862x144
      mm
    • Weight:
      48,7
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM, cTUVus, FCC
    Accessory Code
    Description
    include
    Spigot for ECLPANELTWCXL
    include
    Flight case for 1 pc of ECLPANELTWCXL
    include
    Front intensified diffusion filter for ECLPANELTWCXL
    include
    Front high diffusion filter (less output) for ECLPANELTWCXL
    include
    Front medium diffusion filter for ECLPANELTWCXL
    include
    Front low diffusion filter (more output) for ECLPANELTWCXL
    include
    30 degree egg crate for ECLPANELTWCXL
    include
    60 degree egg crate for ECLPANELTWCXL
    include
    48 chambers egg crate for ECLPANELTWCXL
    include
    Short bracket for ECLPANELTWCXL
    optional
    Rain Cover for ECLPANELTWCXL
    optional
    Power-con 32A cable mount straight connector, IN 32A (1P+N+E)
    optional
    40° SnapGrid, for ECLPANELTWCXL by DoP choice
    optional
    Fat-Rabbit for ECLPANELTWCXL by DoP choice
    optional
    SNAPBAG 8ft DoubleHEX for ECLPANELTWC fat-rabbit (EPTWCXLSRXL)
    optional
    SNAPBAG 6' x 5' for ECLPANELTWC rabbit-ears (EPTWCXLSRXL)
    optional
    40° SnapGrid, to be mounted on SnapBag 6' x 5' (EPSRXLSBRER65)
    optional
    Single Universe DMX transceiver with Bluetooth
    optional
    optional
    Aluminum clamp for 28mm spigot, 200kg load, 48-51mm tubes, black
    optional
    Selflock slim clamp for 28mm spigot, 100 kg load, 40-70 mm tubes, black
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    File name File size Download
    Letter datasheetEclpaneltwcxlpack_A4_DATASHEET_(EN).pdf712KB

    User manual

    File name File size Download
    User manualEclpaneltwcxlpack_USER_MANUAL_EN.pdf8MB

    DMX chart & personalities

    File name File size Download

    Photometrics

    File name File size Download

    CAD symbols & drawings

    File name File size Download

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Info Request